Stair Climber

Hardware There are two driving motors. One in the front and one in the back. It is 4 wheel drive but it cannot turn. The drive motors are not geared. The third motor is used to control the arm. that is geared down 1:5. The arm lifts up the front wheels, it drives foreword to get the front wheels on the next step, then the arm goes back, and lifts up the back wheels and the robot drives forward to get the back wheels on the step. Program The program is really simple. The PSP-NX-V3 remote control's the robot. one joystick turns the drive motors, and the other moves the arm. My Blog: Google Plus page: Facebook page:

You can listen to Stair Climber online on Radio and Podcast. Open the player on this page to stream the available audio.

Stair Climber is an episode from Mindstorms Podcast Videos by Timothy Endersby.

The episode duration depends on the source podcast feed and may not always be available.

This episode was published on Feb 19, 2013.

Yes. Use the heart button on the episode page to add it to your favorite episodes list.

Yes. This page shows related episodes from Mindstorms Podcast Videos when more episodes are available from the podcast feed.