Radio and PodcastRadio and PodcastLive Radio & Podcasts
Rapid Spanning Tree 802.1w artwork
Technology

Rapid Spanning Tree 802.1w

Cisco Hands On Training Podcast by Darrell Root

Mar 8, 2009Technology

This video demonstrates layer-2 convergence in less than 2 seconds thanks to rapid spanning-tree. Rapid per-vlan spanning-tree is configured with "spanning-tree mode rapid-pvst". The rapid spanning tree protocol, 802.1w,...

About This Episode

Rapid Spanning Tree 802.1w is an episode from Cisco Hands On Training Podcast by Darrell Root. This video demonstrates layer-2 convergence in less than 2 seconds thanks to rapid spanning-tree. Rapid per-vlan spanning-tree is configured with...

Podcast

This episode belongs to Cisco Hands On Training Podcast.

Listen Online

Use the player on this page to stream the episode online.

Episode Details

Published Mar 8, 2009, audio available.

Questions About This Episode

What is Rapid Spanning Tree 802.1w about?

This video demonstrates layer-2 convergence in less than 2 seconds thanks to rapid spanning-tree. Rapid per-vlan spanning-tree is configured with "spanning-tree mode rapid-pvst". The rapid spanning tree protocol, 802.1w, is the answer to the slow convergence time of the historic 802.1d spanning-tree protocol. Rapid spanning tree replaces timers with triggered updates. Switches almost never wait for a timer to expire. When converging on a new switch-to-switch link they will start with the port in the discarding state. The upstream switch (closest to the root bridge) will send a proposal to the downstream switch. The downstream switch will put all other downstream switch-to-switch (P2P) ports into the discarding state (preventing a loop) and then accept the proposal. Once the proposal is accepted, the switches will forward on the new link. Then the downstream switch will repeat the procedure on each downstream P2P link. While seemingly complex, because none of these actions wait for a timer to expire, the end result is spanning-tree reconvergence in seconds. Edge ports (going to end hosts) are known because they are configured with "spanning-tree portfast". Edge ports never go into the discarding state because they cannot create a bridging loop. Rapid spanning-tree incorporates improved versions of the backbonefast and uplinkfast improvements, making configuration of those features unnecessary. It is still possible to configure bpduguard, rootguard, and loopguard. Configuring portfast is essential to identify edge ports.

Where can I listen to Rapid Spanning Tree 802.1w?

You can listen to Rapid Spanning Tree 802.1w online on Radio and Podcast. Open the player on this page to stream the available audio.

Which podcast is Rapid Spanning Tree 802.1w from?

Rapid Spanning Tree 802.1w is an episode from Cisco Hands On Training Podcast by Darrell Root.

How long is this episode?

The episode duration depends on the source podcast feed and may not always be available.

When was this episode published?

This episode was published on Mar 8, 2009.

Can I save Rapid Spanning Tree 802.1w for later?

Yes. Use the heart button on the episode page to add it to your favorite episodes list.

Are there related episodes from Cisco Hands On Training Podcast?

Yes. This page shows related episodes from Cisco Hands On Training Podcast when more episodes are available from the podcast feed.